For small lots, mix the required quantity of Thiamethoxam 30 % FS with 10-20 ml of water for each kg of seed to be treated. Add the slurry to the seed and rotate or stir the container (Plastic drum or bag) until the seeds are uniformly covered(usually less than a minute). It is recommended for application as a slurry with continuously operating commercial seed dressing equipment. For preparation of slurry, proceed as follows: 1. Put 1/2 of the required water top of the mix tank 2. Add the required quantity of Thiamethoxam 30 % FS while stirring continuously. 3. Allow the product to disperse. 4. Switch the agitation system or stir manually. 5. Top up with the remaining volume of water. 6. Maintain agitation of the slurry during the whole time of use. 7. The slurry has to be used within 24 hours after preparation.